Ultra Clear Fishing Rod Building Epoxy is designed and manufactured in Australia for Australian conditions. UBR Ultra Clear is a 2 part, low viscosity epoxy that produces crystal clear finish. It is solvent-free and cures to form an extremely high strength abrasive resistance protective coating which is perfect for fishing rod building applications. Tolerant of humidity and serviceable to temperatures up to 100° Celsius. It even has great curing properties even at low working temperatures.
This epoxy works extremely well with suspended pigments for marbling details.
7.5ml Kit includes 5ml Syringe Part A + 2.5ml Syringe Part B
15ml Kit includes 10ml Syringe Part A + 5ml Syringe Part B
30ml Kit includes 20ml Syringe Part A + 10ml Syringe Part B
375ml Kit includes 250ml Part A + 125ml Part B
750ml Kit includes 500ml Part A + 250ml Part B
1500ml Kit includes 1000ml Part A + 500ml Part B
This package does not include any Fumed Silica for glueing handles/reel seats. Please see the Ultra Clear Epoxy Kit 300ml + Fumed Silica for more details.
Nil V.O.C. Free from any suspected or potential carcinogens.
|Cure Time:||48 hours at 5°C|
|36 hours at 15°C|
|24 hours at 25°C|
|12 hours at 35°C|
|Tack-free time||8 hours at 15°C|
|(thin film initial cure)||6 hours at 25°C|
|3 hours at 35°C|
RodKit Mixing Instructions:
2ml Part A + 1ml Part B
- In your mixing cup add 2 parts of A with 1 part of B to a clean mixing cup.
- Stir thoroughly for 5 minutes using a mixing stick. Scrape the edges of the mixing container to ensure
complete and thorough mixing has been achieved. Keep your movements slow and the stirrer
touching the bottom of the mixing cup. Stirring too quickly can introduce unwanted bubbles into the
- Working time is approximately 30mins at 25°C